ISSN 0862-5468 (Print), ISSN 1804-5847 (online) 

Ceramics-Silikáty 55, (4) 373 - 377 (2011)


MICROWAVE DIELECTRIC PROPERTIES OF Ba0.75Sr0.25 (NdxBi1-x)2Ti4O12 SOLID SOLUTION
 
Mingzhu Long 1, Wendong Zhuang 2, Bin Tang 1, Shengquan Yu 1, Xiaohua Zhou 1, Shu Zhang 1
 
1 State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu, 610054, China
2 Chengdu Tiger Microwave Technology Co., Ltd, Chengdu, 611713, China

Keywords: Ba0.75Sr0.25(NdxBi1-x)2Ti4O12, Tungstenbronze-type, Dielectric properties, Microwave
 

This work investigated the influences of Bi content on the phase structure, phase composition, microstructure and microwave properties of tungstenbronze-type like Ba0.75Sr0.25(NdxBi1-x)2Ti4O12 ceramics. XRD patterns showed that the main crystal phase of the ceramics with different Bi content (0.75 ≤ x ≤ 0.9) sintered at 1250°C to 1400°C for 3 h was BaNd₂Ti₄O₁₂ with small amount of second phase Ba₂Ti₉O₂₀. SEM photographs suggest that Bi could work as sintering aids promoting the densification and grain growth. In the case of the ratio of Nd and Bi (x : (1-x)) is 3:1 namely x is 0.75(B13), this ceramic shows optimum dielectric properties with a high dielectric constant (ε) of 118.5, a quality factor (Q × f) of 4907 (f = 2.8 GHz), and a temperature coefficient of resonant frequency τf = –1.3 ppm/°C. As the addition of Bi increased from 0.1 to 0.25, the value of ε markedly increased, the value of Q × f and τf decreased with a τf value finally approaching to zero.


PDF (1.7 MB)
 
Licence Creative Commons © 2015 - 2024
Institute of Rock Structure and Mechanics of the CAS & University of Chemistry and Technology, Prague
Webmaster | Journal Contact