ISSN 0862-5468 (Print), ISSN 1804-5847 (online) 

Ceramics-Silikáty 45, (4) 151 - 157 (2001)


HIGH-TEMPERATURE PROPERTIES OF A BINDER BASED ON GYPSUM-FREE PORTLAND CEMENT OVER THE TEMPERATURE RANGE OF 20 TO 1200°C
 
Ševčík Václav 1, Škvára František 2
 
1 Air Force Technical Institute, Mladoboleslavská, 197 06 Prague, Czech Republic
2 Department of Glass and Ceramics, Institute of Chemical Technology, Technick· 5, 166 28 Prague, Czech Republic

Keywords: Gypsum-free, Portland cement, Refractory, High-temperature properties
 

Hydration products of GF cement differ from those of Portland cement in morphology of Ca(OH)₂ which in hydrated GF cement is in an extremely fine, and for the most part X-ray amorphous form. The morphologically different Ca(OH)₂ in hardened GF cement is very disadvantageous with respect to the development of strength at temperatures at which Ca(OH)₂ is decomposed. This fact is responsible for a rapid decrease in strength of hydrated GF cement at about 500 °C. Over the entire temperature range of 20 to 1200 °C hydrated GF cement exhibits a higher post-firing strength than Portland cement made of clinker of the same composition. Mortar of GF cement with corundum aggregate and stabilized with 15% silica fume attained t0.5 = 1189 °C after firing at 1200 °C (measured to ČSN ISO 1893), which is a performance property comparable to that of alumina cement with a lower Al₂O₃ content.


PDF (0.2 MB)
 
Licence Creative Commons © 2015 - 2024
Institute of Rock Structure and Mechanics of the CAS & University of Chemistry and Technology, Prague
Webmaster | Journal Contact